A self-expanding snap for openGrid. | Download free 3D printable STL models
openConnect - openGrid＇s own Connector System by mitufy | Download free STL model | Printables.com
A new connector system, designed for openGrid. | Download free 3D printable STL models
Underware for openGrid - Free 3D Print Model - MakerWorld
Download this free 3D print file designed by David D. This is the openGrid adaption of the Underware system by Hands on Katie. The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. If you want to create your own variation of the openGrid Underware channels I can highly recommend the awesome openGrid Underware generator created by @pedroleite! This allows you to create any size of channels and also wider channels. Boost MeLike this project? Boost me! See my introduction video for details:
Underware for openGrid Customizer - Free 3D Print Model - MakerWorld
Download this free 3D print file designed by Pedro Leite. Parametric Underware for openGridWelcome to the Beta Underware for openGrid customizers! MembershipMembership tiers available! Show your appreciation, ask for a model or fully commercial private ask! See policies and enquire for more!Check out my new model for drawers and shelves with a mix of Gridfinity, openGrid and Neogrid capable! Following the success of Underware - The Ultimate Cable Management Solution and Underware 2.0 - Infinite Cable Management! the guild presents the beta version of the Underware for openGrid customizers. openGrid is a solution designed by David D. that you can follow in openGrid - Wall/Desk mounting framework/ecosystem and he also released the Underware for openGrid this release brings you the customizers. If you need an alternative to generate and even print on demand, Perplexing Labs has launched their generator CyberMonday Special: Texturized straight channel for your testing! Amazing news: Follow Distracted Dragon Makes for a new series on openGrid and Underware! New grip flare inspired by Gavin F design: Better Grip Flared Underware Channels | openGrid seek the new option under the Advanced section of the customizer, skews the grips outside by a user defined flare angle, should increase grip on clearance issues, needs user testing due to materials brittleness. Grip flares are now available for full wall with cutouts for flexibility, use the letter S on the suppressor string to replace a grip for a static, non flare one. Note: All item holders on Underware 2.0 or the Multiconnect Part Generator have mounting options for openGrid, see the collection openGrid - Models I like from David D. for further multiconnect alternatives to his originals! You now can use text embossing instead of multicolor, choose the option to only emboss.You now can have channel separators on some of the channel types, use a string with letter S to denote where a channel appears, they are half openGrid grid size and first one is middle of your width. Test combinations, like SNNNSS on larger widths to accomodate new use cases. Need ideas to get it done?Follow Hand's on Katie for a cool way to use all of this underware stuff… See the 2025 Organization systems from Hands On Katie: Have you seen the decorative veneer channels? Missed that, really?Why is this a beta release? We want your feedback, as we need to do extensive testing to improve the model and fitting for everyone. We haven't provided yet tweaks for the clearance of parts, but we are listening! Let us know what additional variants you prefer next!Available channelsWe have released the following channels:I Channel (Straight)L Channel (curve from 2 straight portions, or omit straights with zero length) (now can be flipped, and additional radius added according to width)T Channel (3 way straight sections, can omit any of the 3 segments) Separate width on each segment!X Channel (4 way straight sections, can omit any segment)S Channel (2 Straight pieces with a curved portion between - not all widths and left/right, up distance will produce valid results, beware!)I Channel with height Change (Straight) - experimental, needs supports to print.I Channel with width change (Straight) - experimental, requires validation to have grips on both sidesDiagonal Channel (2 Straight pieces with a diagonal piece between, validate results before printing)Flat text label customizableI Channel with bridge (Straight) over a given height and width of channels below, mandatory 1 length on both sides.I Channel (Straight) test with texturesExperimental Mitre ChannelThe bottom Y axis channel is also customizable with cord cutouts, text with color and allow suppression of connection points in all models. Want to contribute? Send a pull request? Report an issue? Learn OpenSCAD? All code is available on GitHub. Join the growing community of contributors!: openGrid-3D/openGrid-openSCAD Watch this video to find out more:Key PointsOpen-source design - The whole solution is open-source, so feel free to extend and come up with your own brilliant solutions.Parametric files - Customize your channels with over 10,000 channel variations without needing modeling skills or downloading CAD software!Printing - all files are printable as they are, without supports (except height change as it's not possible). Changelog2025/04/18 - Initial uploaded versionChange with correction to cutout channels color and text object color.Added suppression of connectors (grips) with a configuration string, separate channels (for multi-way including T top as 4th channel) by a comma. Use the letters N for none, L - Left suppression, R - Right suppression, B - Both suppressed.2025/05/14 - Fix for connector chamfers when width > 1Added the S Channel2025/05/30 - Decorative mode and reduced height capabilities2025/06/03 - Experimental support for straight channel with height change2025/06/06 - Fix for S channel decorator support appearing when not needed2025/07/03 - Added variable width straight channel2025/07/16 - Added option to allow the flip of the L channel to curve to the other side2025/07/31 - 2K customizations milestone, grip flare on advanced options, text embossing instead of multicolor and fix for text positioning.2025/08/03 - New text label flat piece, idea from https://www.reddit.com/user/Glad-Cryptographer30/2025/08/03 - All channels with new flare grip code, suppression code (letter S for static grips)2025/08/04 - Diagonal channel and fix to S channel, added additional radius for L channel2025/08/06 - Fix for height changes on flared I (straight) channels2025/08/07 - Fixed cord cutout for height change channels2025/08/08 - New Bridge Channels2025/08/18 - Fix for L channels flare grips height changes and additional radius positioning2025/08/25 - Fix for I Bridge channel to allow better setting of heights, please validate choices!2025/08/28 - Added Grip Flare to the I Bridge Channel2025/09/03 - Fix for smaller height Bridge Channel2025/09/06 - Fix to allow distinct suppression on both sides of the Bridge Channel, separate with comma; Added Half Bridge option2025/09/07 - Fix of distinct width for each segment for the T channel, smaller artifacts on larger size disparities2025/09/10 - Internal channel separators in Advanced options, for straight (I), Curve (L), Diagonal and S channels.2025/09/22 - Fix for Grip flares on channel bridges with specific heights2025/11/08 - Fix for Cable cutouts and channel separators on L channel2025/11/20 - New option for cable cutouts exit on top of the channel, I channel test only. Idea from @ljhms, visit his model, authorized and asked to include on customizer.2025/11/28 - Testing textures on Straight Channel2025/12/16 - Experimental mitre channel2025/12/16 - Testing of filament insert on straight I channel2026/01/25 - Fix for cable cutout on width change per user assistance on comment below.2026/02/02 - Fix for Cable cutouts of T channel.
openConnect - Clamshell Holder Generator by mitufy | Download free STL model | Printables.com
A clamshell holder using the openConnect system. | Download free 3D printable STL models
Modular Desk Shelf .STL Pack (Digital Files)
3D print your own modular desk shelf with this Digital STL Pack. Built for practical storage and modular flexibility, this is the complete set of over 1,000 STL files for 3D printing a fully customizable desk shelf system.� All files are supported by a complete 40+ page step-by-step Print & Assembly Guide! What's Included� 📦 Complete Desk Shelf STL Library 🧩 Detailed Print & Assembly Guide 📘 Free Lifetime Updates 🚀 Features � ️ This modular desk shelf uses off-the-shelf wooden dowels paired with your own 3D printed components to create a strong and flexible shelf system.� Compatible dowel diameters: 7/8 in (22mm) 21mm 20mm (This product is a digital download. No physical parts are included.)
3D Models Free Download - Open3dModel.com
Free 3D Models with over 150.000+ 3d models for Free Download. Available in Blend, Max, Obj, Fbx, Skp, C4d, Ma, Mb, Fbx, Dae, Stl formats with highly detailed, low poly, rigged, animated, and printable.
Minimalistic Xbox Controller Stand by agepbiz | Download free STL model | Printables.com
Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license tier in my club
Modular tripod handle by FredrikHamrebjorkDesigns | Download free STL model | Printables.com
This is a non-commercial print, this means you are not allowed to sell files or prints of this model.
Unfolder - Create papercraft easily
Unfolder is a 3D model unfolding tool for creating papercraft.
Offgrid® — Design Studio
Offgrid® is a modern design studio that makes brands impossible to ignore. Clients include Lovable, Ramp, Figma, Meta, and Intercom.
Free 3D-Printed Modular Storage 🧱
Boards, bins, drawers, mounts — all free to download. Build a setup that grows with you.
SKÅDIS Spool Brackets - Free 3D Print Model - MakerWorld
Download this free 3D print file designed by jetpad. The Ultimate Filament Brackets for IKEA SKÅDIS Pegboard System! Transform your organization game with these filament brackets, meticulously designed for the IKEA SKÅDIS pegboard system. Key Features:Versatile Spool Support: Accommodates a variety of spool widths, ensuring compatibility with most filament brands.Efficient Design: Requires only one bracket per spool after the initial setup, making it resourceful and easy to manage.Secure Fit: Each bracket attaches firmly to the SKÅDIS pegboard with three connection points, ensuring stability and security.Minimal Filament Usage: Designed to be filament-efficient, these brackets won't drain your supply.Fast Printing: Optimized for quick print times, so you can get organized faster.Compact Print Size: Easily printable on an A1 mini, making it accessible for most 3D printer users.Tight Fit: Allows a snug fit of spools on the pegboard, maximizing your storage space.Batch Printing: Nests tightly on the build plate to print up to 8 brackets simultaneously, saving you time and effort.Aesthetically Pleasing: Crafted to look sleek and professional, enhancing the appearance of your workspace.Efficient Organization:Dual-Spool Support: Two spools can share a single bracket on each side, letting you support up to 10 spools with just 11 brackets.Customizable Spacing: Use the “A” bracket for optimal spacing of Bambu Labs spools and a variety of other sizes. For extreme cases with wider or thinner spools, print “B” brackets for customized spacing.Printing Tips:Bed Preparation: FRESHLY CLEAN YOUR PRINT BED WITH SOAP AND WATER BEFORE PRINTING! Material: PETG recommended for long term durability. PLA is not recommended. Why You'll Love It: These filament brackets are designed with the modern maker in mind. Not only do they provide a practical solution for filament storage, but they also enhance the aesthetic of your workspace with their sleek design. Easy to print, install, and use, they are a must-have for anyone looking to keep their 3D printing materials organized and accessible. You can fit three rows of these brackets on a single SKADIS board, leaving two rows of unused SKADIS connector holes at the bottom. To make use of this space, I’ve also designed brackets for mounting cereal box filament containers. These allow you to add a row of airtight cereal box holders below the board, helping you keep your filament organized and moisture-free while maximizing your storage setup. Printing the Brackets:There's an “A” bracket and a “B” bracket. Using all “A” brackets will give you correct spacing for Bambu Labs spools and should accommodate a wide variety of spool sizes. In extreme cases where you are using wider or thinner spools, you may need to print “B” brackets for different spacing. The “A” brackets have two tabs on the right and one of the left. The “B” brackets have two tabs on the left and one on the right. It may be helpful to print the “B” brackets in a different color to make it obvious. Update: January 2nd, 2025 - Modified the lip on the bracket to print at a slightly steeper angle. This should help keep the spools more secure. October 4th, 2025 - @Seidlm1982 has created some color sample tags to go with the spool holders.
Mini Skyline | Turn Real Places into Printable 3D Models
Choose a real place, shape a printable city or terrain model, preview it in 3D, and export a slicer-ready 3MF with Mini Skyline.
Malleable Software
Software that gives users extreme agency over the interface, such as JIT interfaces.
GPT-6 and Intelligent UI for everyone
Web Tiles (by paperpilot.dev) — Semble
Introducing Patchwork-26